Identifying an Alloy Crossflow Head?

Status
Not open for further replies.
C2A heads flow about 138 cfm, at 500 to 600 thou lift, and can make 212 hp on pump grade gasoline. Add N20, and it goes right to 300 hp if the right excess fuel factor is balanced. In fully gas flowed form, there is 275 cfm, enough for 422 hp on pump grade gasoline, Add N20, and it goes right to 597 hp

Here are some pictures of the best modded C2A head.

https://www.facebook.com/media/set/?set ... 555&type=3
 
Status
Not open for further replies.
Back
Top