Greg":1fpy714u said:I mounted mine on one of the bolt holes previously used to mount the brackets for the power steering pump braces. It is on the drivers side of the engine towards the front. The sensor and signal converter I purchase let's you adjust the gain of the signal and appears to work well. I have to get the throttle body finished so I stop leaning out the engine to be sure. Whenever I get time to work on it again I'll take some pictures.
Greg
fordconvert":b1tpo74c said:I read the instructions for one of the aftermarket sets and I believe it also recommended a cooling port. I wonder if that is because the cylinder walls are much thinner than the heads? You would think the liquid would dampen things but maybe at those frequencies it helps by damping out other sounds?