Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2018 Contributors:
StarDiero75, curts56, DannyG, B RON CO, wsa111, Captainslow42, falconcritter
Econoline, THE FRENCHTOWN FLYER, 95FordFleetside, turbo6, Max_Effort, WorldChampGramp
cr_bobcat, C.S.Designs, pmuller9, gus91326, rwbrooks50, rocklord, drag-200stang, Big64my79Effie, CNC-Dude, gb500

2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40,
mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry

Unknown->> M.Ketterer, T.Smith, J.Myers, P.McIntire - Please PM me (1966Mustang) and lemme know who you are!

Thread pitch on Clifford 6=8?

Moderator: Mod Squad

huntnfish08
Registered User
Posts: 34
Joined: Wed Jan 29, 2014 7:19 pm
Location: Wisconsin

Thread pitch on Clifford 6=8?

Post #1 by huntnfish08 » Fri Jul 12, 2019 3:35 pm

I've got a Clifford intake and would like to put in a vacuum barb. There is a hole centered below the carb mount that a 3/8-16 bolt will thread into but they don't seem to offer that thread to barb adapter.
Any help on this thread pitch?
Adam White

1978 F150, 300cid, NP435, 4x4
Clifford intake, 2150 1.08" 2bbl, EFI exhaust manifolds.

Image

User avatar
bubba22349
Global Moderator
Posts: 9048
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: Thread pitch on Clifford 6=8?

Post #2 by bubba22349 » Fri Jul 12, 2019 5:22 pm

Should be iron pipe threads, Try a 1/4 inch NPT. Good luck :nod: :thumbup:
A bad day Drag Racing is still better than a good day at work!

I am still hunting for a project car to build but with my current low budget it's not looking so good. My Ex- Fleet of Sixes these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

Who is online

Users browsing this forum: jgregg13 and 13 guests