Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2018 Contributors:
StarDiero75, curts56, DannyG, B RON CO, wsa111, Captainslow42, falconcritter
Econoline, THE FRENCHTOWN FLYER, 95FordFleetside, turbo6, Max_Effort, WorldChampGramp
cr_bobcat, C.S.Designs, pmuller9, gus91326, rwbrooks50, rocklord, drag-200stang, Big64my79Effie, CNC-Dude, gb500

2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40,
mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry

Unknown->> M.Ketterer, T.Smith, J.Myers, P.McIntire - Please PM me (1966Mustang) and lemme know who you are!

67 Mustang - how do you insert fuel pump?

Moderator: Mod Squad

thestang
Registered User
Posts: 88
Joined: Fri Apr 27, 2018 2:22 pm

67 Mustang - how do you insert fuel pump?

Post #1 by thestang » Sun Aug 12, 2018 5:38 pm

Hey guys

I just pulled my fuel pump. Is there a way you have to insert the new fuel pump?

User avatar
B RON CO
VIP Member
Posts: 794
Joined: Tue Apr 05, 2016 7:02 pm
Location: Long Island, NY
Contact:

Re: 67 Mustang - how do you insert fuel pump?

Post #2 by B RON CO » Sun Aug 12, 2018 6:10 pm

Hi, if the lobe on the cam is up and working the lever on the fuel pump you will have trouble installing the pump. Bump the engine over until the fuel pump slips right in. We used to pack the cavity of the fuel pump with grease on a new pump. I don't remember exactly why, but I still pack them. Good luck
B RON CO. Still workin' on it!

1933 Ford Pickup - 59A Flathead V8
1966 Ford Bronco - U14 - 170/200 Straight 6
1966 Ford Mustang - 289 V8

thestang
Registered User
Posts: 88
Joined: Fri Apr 27, 2018 2:22 pm

Re: 67 Mustang - how do you insert fuel pump?

Post #3 by thestang » Sun Aug 12, 2018 6:43 pm

B RON CO wrote:Hi, if the lobe on the cam is up and working the lever on the fuel pump you will have trouble installing the pump. Bump the engine over until the fuel pump slips right in. We used to pack the cavity of the fuel pump with grease on a new pump. I don't remember exactly why, but I still pack them. Good luck


What do you mean by bump?

User avatar
chad
Registered User
Posts: 4553
Joined: Sat Oct 24, 2009 9:51 am
Location: Lawrence Swamp, S. Amherst, MA

mechanical fuel pump to motor

Post #4 by chad » Sun Aug 12, 2018 8:10 pm

just 'tap' the key "on".
Use the engine/battery to do ur wrk.
Do not start the vehicle, just 'click', tap, jog the motor - quick on/off.
Do it several times till the gears in there line up w/the centric on the pump's arm.
I'd put a gasket on the pump w/a lill 'snot', 'glue', whatever's an appropriately designed
adherent.
We assume U R using a mechanical pump & placing it on the motor.
(B nice to have a buddy or wife do this while U struggle under the hood).

B careful of any rotating assembly catching clothing or skin & causing damage
8^0

"...don't remember exactly why..."
increase life of oil pump cam/cenrtic on pump?
"Big thing is only make one change at a time. Change 2 or more things at a time it becomes difficult to figure which change helped or hurt" turbo2256b » 1/16/2017
Chad - '70 LUEB on '77 frame (i.e. PS, D44, trapezoidal BB 9", 4.11), 250, NV 3550 & DSII to B transplanted, "T" D20/PTO, 2" SL, 1" BL, 4 discs, 33"X15", tool boxes, etc. Seeking: Hydraulic gear motor for Koenig pto. chrlsful@aol.com (413) 259-1749

User avatar
wsa111
FSP Moderator
Posts: 3145
Joined: Sat Jan 24, 2004 5:28 pm
Location: South Carolina
Contact:

Re: 67 Mustang - how do you insert fuel pump?

Post #5 by wsa111 » Sun Aug 12, 2018 8:42 pm

Be careful of the thickness of the new fuel pump flange. I just installed a new Carter & the thickness of the mounting flange was .125" thinner than the previous pump.
Solution was to shorten the original bolt by .125". Or purchase a new fastener shorter as necessary.
67 mustang,C-4, with mod. 80 hd, custom 500 cfm carb with annular boosters, hooker headers, dual exh.-X pipe, flowmaster mufflers, DSII dist. MSD-6al & MSD-Blaster 8252 Coil. Engine 205" .030" over with offset ground crank & 1.65 roller rockers. 9.5 comp., Isky 262 cam.
2003 Ford Lightning daily driver. Recurving Distributors. billythedistributorman@live.com
Image

thestang
Registered User
Posts: 88
Joined: Fri Apr 27, 2018 2:22 pm

Re: 67 Mustang - how do you insert fuel pump?

Post #6 by thestang » Sun Aug 26, 2018 5:25 pm

wsa111 wrote:Be careful of the thickness of the new fuel pump flange. I just installed a new Carter & the thickness of the mounting flange was .125" thinner than the previous pump.
Solution was to shorten the original bolt by .125". Or purchase a new fastener shorter as necessary.


Worked out perfectly for me.

Who is online

Users browsing this forum: No registered users and 23 guests