Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40, mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry, rzcrisis, DoctorC, jamyers, Motorboy, fastpat, Silverback280, chad, drag-200stang, THE FRENCHTOWN FLYER, Jimmys61falcon, rjonah, Sooshi, Robert92867, Invectivus


PLEASE TEST ON http://dev.fordsix.com

<<<***PLEASE READ*** New Site Update >>>

Walker Products Autolite/Motorcraft 2100 15369D Instruction Sheet

Moderator: Mod Squad

User avatar
old28racer
Registered User
Posts: 764
Joined: Wed Apr 12, 2017 3:27 pm
Location: Camarillo, CA

Walker Products Autolite/Motorcraft 2100 15369D Instruction Sheet

Post #1 by old28racer » Sun Jun 21, 2020 1:53 pm

I just got a Walker Products 15369D carb kit & it did not have an instruction sheet in the box. Kit is for a 2100 Autolite carb. I have looked all over their Web Site and can not fine any rebuild instruction sheets. Anyone know how I might find one today? Would like to get started but may have to call them on Monday. Thanks
Bad Day Racing Is Better Than A Day In The Stands :mrgreen:

User avatar
bubba22349
Global Moderator
Posts: 10033
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: Walker Products Autolite/Motorcraft 2100 15369D Instruction Sheet

Post #2 by bubba22349 » Sun Jun 21, 2020 3:36 pm

This is the link to the Autolite / Motocraft 2100 carb rebuild "Instruction Sheet's" though it isn't the "Walker Products" per say it's still the common instruction sheats that used in all carb rebuild kits from the many brands of rebuild kits. It covers all these Models 1959 & 60 Edsel's, 1958 to 1974 Ford & Mercury cars plus 1958 to 1974 Ford Trucks and more. Ten pages worth so you should be able to find all the assembly and set up info you could ever need. Best of luck on your carb rebuild :thumbup:

Autolite / Motorcraft 2100 1958 to 1974
https://www.carburetor-parts.com/assets ... /K4008.pdf
A bad day Drag Racing is still better than a good day at work!

I am hunting for a cheap project car to build up. My Ex-Fleet of Sixes sadly these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

User avatar
old28racer
Registered User
Posts: 764
Joined: Wed Apr 12, 2017 3:27 pm
Location: Camarillo, CA

Re: Walker Products Autolite/Motorcraft 2100 15369D Instruction Sheet

Post #3 by old28racer » Mon Jun 22, 2020 8:44 pm

bubba22349 -- Thanks for the reply, I saw that sheet on Mikes site and will use it if I can't find one for Walker Products. Only thing different was the scale to set float level.

Update, late Monday 6/22/2020 -- Got the new kit mounted in the 2100 carb, all went well and it should work fine. May have to reset float level later, does 7/16 down from top edge to top of float tail end sound right?
Bad Day Racing Is Better Than A Day In The Stands :mrgreen:

User avatar
bubba22349
Global Moderator
Posts: 10033
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: Walker Products Autolite/Motorcraft 2100 15369D Instruction Sheet

Post #4 by bubba22349 » Mon Jun 22, 2020 9:56 pm

Hi old28racer, yes that should be in the ball park. :nod:
A bad day Drag Racing is still better than a good day at work!

I am hunting for a cheap project car to build up. My Ex-Fleet of Sixes sadly these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

User avatar
old28racer
Registered User
Posts: 764
Joined: Wed Apr 12, 2017 3:27 pm
Location: Camarillo, CA

Re: Walker Products Autolite/Motorcraft 2100 15369D Instruction Sheet

Post #5 by old28racer » Mon Jun 22, 2020 11:31 pm

bubba -- Thanks, it will be a few months before I get the modified 240/300 intake installed in my F250 300 4.9L that I am going to try my Holley 2300 & this Autolite 2100 on.
Bad Day Racing Is Better Than A Day In The Stands :mrgreen:

User avatar
bubba22349
Global Moderator
Posts: 10033
Joined: Sun Jan 03, 2010 4:46 pm
Location: Flagstaff, Az. 86005 near the old Route 66

Re: Walker Products Autolite/Motorcraft 2100 15369D Instruction Sheet

Post #6 by bubba22349 » Tue Jun 23, 2020 1:55 am

Ok old28racer, will be looking forward to hearing how this intake carb experiment works out for you. :nod: :thumbup:
A bad day Drag Racing is still better than a good day at work!

I am hunting for a cheap project car to build up. My Ex-Fleet of Sixes sadly these are all long gone! :bang: 1954 Customline 223 3 speed with O/D, 1963 Fairlane project drag car with BB6, 1977 Maverick 250 with C4, 1994 F-150 a 300 with 5 speed.

Who is online

Users browsing this forum: jgregg13 and 13 guests