A
Anonymous
Guest
I put a autolite 2 barrell on my 200 for the center carb and have been going through fuel delivery problems-finally figured out the base to top gasket that came in the rebuild kit is not compatible with the stock floatbulb. The gasket interfered with both the float rising and the needle rising. It's a 108 venturi of unknown age - dug into the carb part box and switched the brass bulb for a newer plastic one and violia, problems dissapeared. The little 108 venturi is an excellant low end carb because of the high velocity produced, next to get a few more miles on the engine and get the 2 Webers hooked up on the log ends.
