All Small Six 1962 Falcon Wagon C4 & 200

This relates to all small sixes
phipplet

phipplet

New member
I’m installing a 1966 200 & C4 into my 62 Squire wagon. My C4 is the “Green Dot.” Transmission.

Here’s my question that seems to ask more questions than answers. And I’ve never seen any photos anywhere on the internet. Does someone know which mini three (3) bolt starter from an FE engine will fit this setup? it’s the136 teeth welded ring wheel torque converter. I’m trying to clear headers.

I’d post the many starters people have suggested on multiple forums, but no one has ever done it or posted a picture saying it works or not? Plus there’s way too many suggestions.

Thanks for any help!
 
Don't know if this could help:

Drive67Bronco

All Small Six Thread 'Need Help Finder a Starter Motor for my 170ci Bronco Build'

I am doing a ground up restoration on a 1967 Bronco. It came with the 170 ci I-6 and the three speed manual transmission. The Bronco will eventually be for my Mother as she has always wanted an early Bronco. I have put a C4 auto behind the restored 170 because my mother cannot drive stick and I wanted to keep the original motor in it. I am running into a bunch of hurdles trying to get this 170ci/c4 combo to work as the Bronco never came in this configuration. At least it never had to my knowledge. I have the Engine and C4 mounted to the frame right now after a little bit of a struggle to...

You could contact some mini starter companies and ask their tech dept.
 
No one on here knows for sure what will fit, but Summit told one of our members that Power Master 9106 would fit a 67 200 C4 and I do not think there is any difference from the 66.
A this point you will have to get it and see. If you do please come back and tell us so we can help others.
 
I just searched ''Powermaster 9106'' and Summit has more than 10 in stock at 168.-- dollars. The 9506 is a different style, heavier and larger starter for the same engines. 209.99 dollars at summit.
Call Summit and see what they say.
 
This may help also:

bubba22349

Thread 'Starter Swaps for the 250's, 200's, & other Small Six'es'

Recently there was a discussion on the big six forum on using the newer small case Motorcraft or aftermarket gear reduction starters in place of the big case old style starters. These newer starters have lots of advantages like smaller diameter cases for more header clearance, less weight, faster starting, to name a few. So thought I would also share some of highlights from mine and others posts here in the small six forum as it also applies to our 250's, & low mount 200's, and many other Small Ford Sixes that uses a 2 bolt starter. Latest Update (05/16/20020) a site member recently found...
  • Like
 
phipplet said:
I’m installing a 1966 200 & C4 into my 62 Squire wagon. My C4 is the “Green Dot.” Transmission.

Here’s my question that seems to ask more questions than answers. And I’ve never seen any photos anywhere on the internet. Does someone know which mini three (3) bolt starter from an FE engine will fit this setup? it’s the136 teeth welded ring wheel torque converter. I’m trying to clear headers.

I’d post the many starters people have suggested on multiple forums, but no one has ever done it or posted a picture saying it works or not? Plus there’s way too many suggestions.

Thanks for any help!
Click to expand...
Yes, this starter will work for your 200 cui. Six cylinder
 
You must log in or register to reply here.

Similar threads

F
All Small Six 1962 Falcon - Swapping a 170 for a 200 plus C4
Replies
5
Views
336
FalconDad
F
B
All Small Six Latest from Bubba for Mustang owners
Replies
1
Views
1K
philford
philford
Back
Top