250 swap radaitor?

[XFlow_Fairlane]

Well I am getting closer to dropping the aussie 250 into the fairlane. I had hacked up the front for a universal fit aluminum crossflow design radaitor. it was way too big and I am not looking to hack up my new frame rails for it again. So do I need a radaitor for a 200 or one for a 302 (to get the right outlets etc?)

I search around and could have sworn we had a sticky for this.

 

[rbohm]

8) you should be able to use one from a six cylinder car with no issues. just get one with three rows instead of two.

 

[FalconSedanDelivery]

if the outlets on the Aussie 250 are in the same place as a US 250 , then you need a Rad for a V-8 from 69 and up , for locations and sizes , the little sixes 144-200 have very small in and outs

 

[jahearne]

I used a radiator for a 302 and it fit perfectly on my 250, but you need the small block V8 brackets.