'63 TurboFalcon Engine Pic w/Jet-Hot Coating!

[Does10s]

Here's a pic of Kelly's Falcon after reassembly. We're testing it this Friday night at SIR in Tucson. Pray for 12's!!!
Thanks to Mike (AZCoupe) at www.fordsixparts.com for hooking us up with the coating.

Or go to http://www.cardomain.com/member_pages/v ... t=25&val=1 and you can make the pic a bit larger.
Later,
Will

 

[MandarinaRacing]

Will, I usually don't pray, but I'll pray for this!!!!

Alex

 

[Anonymous]

Dude!
Sweet!
Dude!
Sweet!
Dude!
Sweet!
Dude, Where's my car? I wish, Kudos Will, Looking Good

 

[STEVEN.]

The term,"White-Lighting" comes to mind :wrench: Good luck with it! OO6./The-X-Or-Six!

 

[68coupe200]

Can we say BOOOOOST?!?

 

[gravelrash]

Does10s, can i ask.
what mods did you do to your holley to enable it to run blow- through and what fuel pressure do you run.

 

[Does10s]

Just changed out the float for a Nitrophyl (solid) one.
I did cut off the choke horn too.
But other than that it's a stock 350 Holley!
Will

 

[gravelrash]

does10s would it be possible to get a picture of your intercooler and how you mounted it.

 

[fast64ranchero]

I must of missed something, new engine? cause the old one sure ran good
I'm hoping mine will run as good as yours

 

[Does10s]

Look at the date on the first post. It's be out there for awhile!
"Pray for 12's"? Hahahaha, we're in the 11's!

As for the IC I don't think I have any pics of it. But FWIW it's bolted to the inner fender, and I made another mounting point using the outer fender support.

We will be swapping to a larger IC soon. It'll be mounted in front of the radiator.

Will

 

[gravelrash]

ok thanks mate, also what psi is your wastegate set at?

 

[Does10s]

On the 11.85 pass, Kelly noted that it reached 17psi in high gear.
Later,
Will

 

[xctasy]

bird of prey
flying high

Well done. Despite the FART avatar, I love you and your beloveds fine work. I'm Prey-ing you'll get your 10s!

 

[Anonymous]

in that pic your running a ford one barrel. is that so, or at least possible with boost? i posted a question about this in this forum as dodge turbo. anyhow lemme know. thats really interesting

 

[Asa]

that's a direct mount 2bbl, not a 1bbl

Linc is the guy runnin the stock 1bbl

 

[Anonymous]

but you can do it then? with the 1 bbl

 

[Asa]

Linc is doin pretty well with his
i wouldn't do it, but he's trying to see what the limits of the stock system are as he'll just build a better motor once he blows up the current one, i don't think he's found the limits yet

 

[Anonymous]

oh well i wasnt gonna blow its brains out. i plan on getting an older dodge turbo (as posted in boost section) and limiting boost to just a few psi. if it was say, 5 or 6 psi, what would i have to buy for the carby itself, or just adjust what it already has? if i make an adapter i can get em made at school for mid 90's dodges for you guys to go find some turbos. direct bolt on adapter per say. i have friends at the machine shop at school and can get anything made. any how, thanks i know i'm annoying sometimes.

 

[Anonymous]

wow ... thats what I dream about ... that is the most amazing thing I have ever seen ... I wish I had the skills to do this ... but I will try ....

THomas

 

[Does10s]

You too can build it!

If not, FSPP can work with you to get it done!

Later,
Will