Borla Purchase

[Anonymous]

I have found the Borla's I want here...

http://www.exhaustproslinc.com/turbo2inlet.html

The ebay guy did not stock the 2" and this is the best price I have found. I will be converting to dual exhaust and want the mufflers as far to the rear as possible, What is possible and should I get offset/center? Should the pipes run together back to the axle and then over? Any pic's?

Thanks,
don

 

[Anonymous]

I've got glass packs that dump out before the rear end, but here's a pic if it helps any:
http://www.geocities.com/spences66stang/dualexhaust.JPG

 

[Anonymous]

Mine are 2" in and out... they are offset in on the front and center out on the rear... the left offset sits to the inside and the right sits to the inisde putting the pipes closer together by the driveshaft.

Then the center outs go up over the axle and through the valance...
although I am starting to wish I had just run them under the axle and straight out... keeping the pipes centered in the valance has been a pain.

They have been adjusted twice now, and still tend to move around back there... I ended up not using the stock hangers and welding in my own attach points to keep things steady.

overall this layout is pretty slick. you could go center in and center out... but the offset was nice.

I have no pics of the exhaust... I will shoot some and post them for you!


J.

 

[Anonymous]

Thanks Guys, I'll post pics too when I get done.

 

[66Sprint6]

Ive got 50 series flows that go in and out the front with tips in front of the wheels, the pipes to it are run down the driveline and the mufflers are in the "basket" under the rear seat.
Matt

 

[TheDude]

Click on my sig pic. I just added photos of my dual exhaust. I have not forgotten about the sound clip. My dad got laid off from work so it might be a while yet before we get a digital camcorder.

 

[66Sprint6]

OK, the link works, but it takes me a page where I have to sign in. Do you have any other way to get the pics up?
Matt

 

[TheDude]

Here