can the 6 make power yes it can an off its nut engine turbo can crack over 800hp before nos thats what the top crossflows are pulling out in aus so id imagen the new alloy 2v should at the least match that if not better it.
or if so desire you could buy a 1000hp+tubo doch beast from nizpro in melbourne here and fit that i think there test engine is cracking 1200hp now.
one of those engine's ant cheap but anywhere from 15-30g depending on what you got.
so yes they do and can make big hp and low et's
but if youn want to run around with a nice easy to drive car non turbo once you start pushing over 1hp per cube they get a unruly
and turbo once you start pushing past 400hp.
some times from the aus 6 boys
Forced Induction
1. Joe Gauci - TD 8.56 @ 158 WSID (turbo)
2. MarkZE - TE 9.37 @ 140.93mph Willowbank (turbo)
3. Dave Adams - TC 9.63 @ 134mph AIR??? (NOS)
4. Ant Briggs - TF 9.658 @ 139.58mph Willowbank (turbo)
5. Tony Jovevski - TD 10.108 @ 132.99 WSID (turbo)
6. Neb Dimitrejvic - TE 10.31 @ 132mph Heathcote (TRB 041) (turbo)
7. OUTLAW - TE 10.7@119, HP, Auto (NOS)
8. turbocorty - TD 10.8 @ 122mph (turbo)
9. Azza (TE-JET) - TE 11.7 @ 99MPH Calder (Turbo, untubbed)
10.kristian (sleepercorty) - TE 12.90 @ 104 mph (turbo)
N/A
1. OUTLAW - TE 11.51@111, HP, Auto
2. OTD250 - TD 11.7@112, Willobank, Auto
3. Injected250- 12.022@111, calder auto.
4. Rob S -TD 12.30@111.85, Willowbank, Auto
5. Cyco6 - TF 12.35 @ 108.5 Willowbank, auto
6. NOS200 - TE 12.4 @ 109, Willowbank, Auto
7. xlr8ed - TE 13.02 @ 104
8. Kiwi - TF 13.28 @ 103.73, Heathcote, Manual, 3.7's
9. PRO250 - TE 14.3 @97 mph, WSID
10. Oscar - TF 15.96 @ 83, WSID, Auto, 3.45's, Weber