Duraspark Conversion Needs

[Anonymous]

If I go to a Duraspark II from a stock '68 200 set-up, what do I need to buy?

There is a single vacuum distributor and a dual available for a '80 Fairmont. Which one is needed for a conversion. Is the ignition module the same for both?

Thanks!

Jay

 

[Ronn]

Depending on what carb you are using, you only need the single vacuum with the ignition module box. Setup is easy. If you use a later model YF or an RBS carb, single vacuum is what you want.

See the sticky thread above for installation.

 

[Anonymous]

I'm using the 1100 w/ two vac leads to the distributor.

 

[Anonymous]

Which one for a Holley 2bbl?