engine progres [ pic ]

[Anonymous]

the engine in with the T9 behind it , just waiting for my chrome valve cover , yellow spark cable,s and the installing from the turbo setup , but first after rebuilde the engine , gone run it with the orginal parts , when it runs fine , i will do the dura spark / turbo and other upgrades !!
btw did make a new set for egine mounths for the mustang , wait till you see this on , !!!!!!!! a new upgrade for the mustang , in chroom if you want !!uses with rubber ore urethane bushing , orginal mustang bushing wil be used , got the draw,s ready and wil this week gone fit them !gone make 2 sorts , 1 orginal hight and 1 with 15m/m drop !

 

[CoupeBoy]

Looking good it should haul a**, let us know how it handles on the road. Have you gotten a pic of your tower brace posted yet? The brackets look nice on there.

-ron

 

[Anonymous]

sorry ,,, tower brace will be the last i will do , first get the car running , got all the parts ready , did test instal it already , will be all in stainles steel , hardware and brackets and the tube,s !! i,m getting to it ,things going great ! wil put all the parts and draws when ready into the forum , so everybody can make the parts , ore when willing , order some by me , every upgrade to the mustang 6 inline is a performance part for the forum !! this forum is groing great , with all the nice and willing people !! keep it up . i do my part when possible !!

 

[CobraSix]

Looks good...can't wait to see it with the Turbo.

Slade

 

[Anonymous]

where did you get the briaded lines?

 

[Anonymous]

and that cool spark plug wire hider thingy?

 

[Anonymous]

looks nice ill havr to take a pic of mine and post it on the forum it dont got a head on it yet due to my me head isnt here but it is on its way or ill just wait and put pics up when i got it all together

 

[Anonymous]

the hoses are with some hose cover stuf pulled over , stainles steel , not plastic !! every where to buy , i could tell you where i did bought 1 set , but thats in holland ,

the spark wire hider is from a BMW ! there are lots of it here on the yunk yard , nice fitting i think , and looks great too !
btw this is a toyota starlet master booster with a 79 mustang master cylinder ,a right bolt on ! no tower hit ! cable clutch setup from a scorpio , and also the T9 from the scorpio is hanging behind the engine !

 

[Anonymous]

oo

you can get that chrome nylon hose cover stuff at autozone, napa, kragen, summit, carquest, everywhere not to much $$$ either. Jegs even has it. Or you can upgrade and do a solid hose not just covers. If you go this rout prepare to spend a little Green $$$$$. i canget them for you if you want the covers ae about 23.50 for a kit that covers all and the solid hose just for the radiator hoses wll cost ya about 110.50 and heater hose is about 105.50. but you can get the solid stuff for yur vacume lines though. I do Know the solid stuff lasts forever great for hot engines to.





wes

 

[Anonymous]

Good idea on the spark cable hider.. Might even follow that example myself!

Be interesting to see how well the Starlet booster holds up. Is the Euro spec Starlet the same as ours? 3 or 4 door micro japanese vehicle, with a 1.3l motor? If so, it might be wise to see about locating a Starlet GT booster, if there is a difference between them.. I'd hazard a guess that the Mustang is a fair bit heavier than the Starlet...!

 

[Anonymous]

Looks nice Harrie!! I see that you got your Mallory coil on their finally also

Later,

Doug

 

[Anonymous]

Good idea on the spark cable hider.


i love that idea to however i dont knoe how to do it or what parts ya need where u get em at

 

[Anonymous]

i will see how the toyota booster wil do with the car ,and let ye now if it ,s working fine , i dunno if there are a difference between euro and us toyota cars , i now for brake,s that the mazda rotor is a build on for the 4 lug spindel , did explane that in some topic , and dunno if the the euro and us mazda,s are the same, but like i did told , first to get the car running , and i will give a full report how al the stuff is working !

 

[CobraSix]

What year BMW did you find that wire holder from?

Slade

 

[Anonymous]

dunno what year , it whas on the yunk yard , mostely you can see what year on the window screens , but sorry , dont remember , it whas a 535 89 model when i,m right !

 

[CobraSix]

The model will help...time to go junking again...

Slade

 

[Anonymous]

The model will help...time to go junking again...
Slade

right?!

 

[Anonymous]

right?!

yeayea i now , i,m not 100% with my english , i,m stil learning , 8)

of zal ik alles maar in het hollands opschrijven , is denk ik iets moeilijker voor jullie te lezen !!!

 

[Anonymous]

no,I meant "right" as in "I agree with you"...or "I'm with ya"

sorry, thats how we talk in miami...

 

[addo]

Enthusiam, like intoxication, transcends all languages.