rustywagon
Well-known member
Hi guys, what's an average cost of engine rebuild. 3.3L. If there's anyone in bay area who does it, please let me know. So far no luck. Thank you, Michal
WELCOME Bill !!!bill pierce":bk2gqn48 said:It was about 3 years ago when I did my 200.
For the short block I have about $500. into machine shop labor. that's bore, turning the crank decking the block, pressing the rods on the pistons and balancing. I spent about $400 in parts, including ARP rod bolts. I have $300 total into the head, that includes 1.75" intake valves fit into the 1968 head. I assembled it myself
rustywagon":2lhrg4te said:I got first estimate, it's $3.5 - 4k. It's bit more than I thought
What's the correct way to check cylinder(s) pressure?
I checked it, it was evenly low on all 6, but I am not sure, if I did it the right way, I want to check it again.
I keep looking. Thank you.
rustywagon":nef8fhqc said:I got first estimate, it's $3.5 - 4k. It's bit more than I thought