exhaust?

[papawfalcon]

Is there somewhere that I can buy a 2 or 2 1/4 in header pipe for a 200. All I can find is a complete system or stock which is what I got. Or just take my old pipe to a muffler shop. Thanks.

 

[bubba22349]

I don't know of any place making them separate if you can weld then you could get some bends and make it fit. Otherwise I think you might be better off taking it to good muffler shop (one that has a tubing bender and if it's a mandrel type even better). They can make you a bigger head pipe in 2 or 2 1/4 inch to fit. Good luck

 

[vssman]

Give Waldron Exhaust a call. They may be able to get you just the front pipe. http://www.waldronexhaust.com/

 

[papawfalcon]

Thank you for your responses .Greatly appriciate it!

 

[papawfalcon]

ok, I have found three pipes from mustang dealers. 1964-66, 67 , 1968-70. I sure each one has a unique bend. Now that I thought about it not knowing what size they are ? I have a '62 Ranchero which has its own unique quirks. I am thinking about taking my original pipe and having one bent the same only 2 1/4 for my 4.0 x-flow. It's manifold has the same angle as the 200. Not the same as a 250,as I found out with the first pipe I bought. Thanks again for your help and any more thoughts!