All Small Six Ford Inline Six Build on "Engine Gremlins"
- Thread starter Soldmy66
- Start date
This relates to all small sixes
Wow, finding an available and new head/intake from Vintage has been impossible for me for a few years now. How did you find it? On Ebay or Craigslist, etc?
I just found the YouTube channel. They found the head.
Crazy how they found it. I’ve been looking everywhere for one and I only knew one or two people on here who were selling theirs.
fast64ranchero
Well-known member
Why FE rockers? are Terra Yella rockers not available?
It would be nice to know their thoughts on it. Maybe they had the parts already and did not want to buy new pushrods and lifters and I cannot blame then with the crap lifters that is now available. I know not long ago that rocker arms unlimited had 1.65 shaft roller tip and bronze bearing rockers. That could be bolt on.
Offset FE rocker tip/advice was made here at Ford Six back in 2016, using the David Vizard method of offset bushes. 67straightsix and I talked about it.
See post #41 in this thread
"https://fordsix.com/threads/high-ratio-rocker-arms.74180/page-3"
See post #41 in this thread
"https://fordsix.com/threads/high-ratio-rocker-arms.74180/page-3"
Last edited:
I found the new upper end build video this morning and watched it. Nice, but the head seems to be made of unobtainium for the moment. I'd like to go that direction, so I'm holding off on upgrades until the availability of parts is clearer. I could build out what I have (big log head) and install EFI, etc. or wait to see what happens with the aftermarket heads and use a different EFI kit.
Jmustang_65
Well-known member
Using a 264 cam with FE rockers.
Similar threads
