Motorcraft/Holley mounting plate

[Anonymous]

Would someone please post a picture showing the hole spacing and bolt spacing for an Autolite/Holley two barrel carburetor (dimensions required)? I'm looking for a foot print.


Thanks.



-Chris

 

[simon]

Chris,

here are the measurements of the autolite 2100 carb and spacer gasket.

Don´t know about the spacing of the venturi holes for a holley 2300 2bbl, but the bolt spacing should be the same as on the 2100.

hope that helps

 

[xctasy]

Spacing is 1.875" between both bores.

Throttle blade bores are 1.6875" for the 500 #4412, and 1.375" for the #7448 350 cfm.



Nice work Simon.

X