NEW motor mounth adjust in 2 hight,s !![pic ]

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
almost ready , gone weld them up this afternoon and post some pic , and bolt them on for a test fit . al stainles steel , the rubbers are from the rear axle spring, rubber ore urethane ! so orginal mustang parts for these new motor mounth !!
there wil be a rubber plate under the mounth that come to the orginal arm in the engine bay , there are adjusteble in 2 hights !! 1 orginal hight and 15 M/M lower for when adding a higher carb for hood clearance !!
when i got it ready i wil post some more pic !
a set without the rubbers wil be about 40 € when i making mutiple sets , other whise a single set wil cost more ![ with rubber ad 8€ with urethane16 € ] powder coating any color you want ore option in polisht stainles steel !
motorsteun.jpg

ready with welding and assemble , now gone build into the car !!
motorsteun7.jpg

motorsteun8.jpg


testfit
testfit.jpg


testfit1.jpg

testfit4.jpg
 
Wow.

Just being silly.... :idea: Why not take it a step further and have the engine move up and down hyrdaulicly. Mad Max move over....
 
I like that. Those could be use when putting a 250 in a falcon so you can lower the motor just a tad to get the hood and air cleaner on

Darin
 
ahahah no , not making dollars !!! its almost the cost of al the stuf !
making a draw in autocad , messering the old mounths !
cutting the brackets
bending them
tubing [ stainles steel ] make to fit ! 4x outside 2 x inside
rubbers
bolt,s en nut,s [stainles steel ]
welding
rubber plate cut and make a hole in it

and imagen al the ouhrs i spend with laser cutting/ milling/ welding /buying nuts and bolts / assamble /rubber cutting .........
so al come,s togheter that i,m not making money , just get my total cost payd ! nothing more !

the wurst part is the outside tubing , the rubbers are US size , so i had to mild a thick tube for that size , would be easyer to order 1 stainles tube in the US , damn US sizes , and nut,s and bolt,s and inh and ,,,,,,,,,,,,,, :D you US guys go to a hardware store and buy some stuf , not here ! i must special order the stuf !! even the damn bolts and nuts !!
 
I have to agree with you. I don't see why we use S.A.E sizes. Metrics are easier and worldwide. I'm up for the switch.

You should come up with a price and see if you can't get any orders. It might be of some real value to someone and they will be willing to pay for it.
 
like i did sayd ,,,the tubing outside is the wurst part , when there are peoplel wanting them i will consider to order a tube in the US , only needing 2 x lengte 62 M/M for each set ! 40 M/M outside and 35,5 inside.
otherwhise i got al the draws and bending messering in my laptop , thats no problem making multiple , but the damn tubing ! :evil:
when i can get the tube in the US in the correct size , it ,s only cutting it on 62 M/M and ready !
like i did post , a complete set without the rubber wil cost about 40€ !that wil only cover MY cost ![ i must order the rubber ore urethane in the US , would be stupid to order in US and sending it back to you US guy,s 8) ]
 
I don't much care for the metric stuff myself. I don't seem to have much luck with the bolts and nuts that are in those sizes. I seem to break about half of them when trying to remove them on my other cars. Us USA goofballs like being different anyways!!!LOL
 
How much do they cost in US $. I have an air cleaner clearance issue that I would like to solve.
 
US would be 44.85 and then ofcourse the shipping , but that would be not much !
these are my prices, the more orders the cheaper i can make them !
btw someone got acces to stainles tube,s ? little pieces , lengte about 62 M/M ? outside 40 M/M inside 35,5 M/M ?
 
cool stuf? ahahahhaahh this is how my living room is looking right now !!! good that my women is out for a couple days !!


coolstuf.jpg


but dont wurry , i got more comming up , how do you like altenator brackets in 5 M/M polisht alu ?\power steering bracket 5 M/M alu ? A/C bracket in 5 M/M alu ?
complete pully set [ like the pullys from a blower . dont now how to cal the rib band ? ? ] in alu ?
crankpulley.jpg

and got in mind to make a body under plate ? yes !! [ dont now how else to call it ] it wil be a plate that wil bolt on to the underside of the car attach to the front valance plate and go half way the oilpan , to protect incomming dirt from driving in the engine bay ! special slotted with half open slot 30x 10 and a open wind tray for cooling the oilpan!
but thats for the winter !! got other things to do now ,it wil take time , but i wil finish al the things i,m saying that i,m gone do , like always !!
btw i,m also got someone who is diecasting aluminium ,gone give it a try with making replica rally pac housing and a dashbord for adding autometer gauges
aludash.jpg
 
what years will those dashboards be for?

my friend, you are amazing, for some reason your website will not work for me (once again i'm blaming the work filter) so i can't find out on my own, but how much of your stuff do you sell?
 
asa 67 ... your wright , my website is down ,it isn,t your pc that is not working wright ! it,s my provider !, didnt look into it for a long time , wil set it up this weekend with al the new stuf and what is comming up next with al the price,s and pic for how to !

now the wurst part , i can only replica parts that i got here ! so i got a 66 mustang and can messering for these 66 parts , would be possible for making stuf for other [ falcon , maverick and other years mustang , ] but i wil need an example to copy ore messering , that is why i now can only make parts for a 66 mustang !
 
You must log in or register to reply here.

Similar threads

A
suspension update! TCP replica [pic]
2
Replies
26
Views
3K
Anonymous
A
A
engine progres [ pic ]
2
Replies
21
Views
3K
Anlushac11
A
Back
Top