Next Mods?

[Anonymous]

I don't think I've ever asked this but what should my next mods be for the stang(what would you guys do?)?

I have a Aus 250 2v head (stock valves/rebuild/3angle valve job), Holley 2bbl 350cfm carb, Clifford 2into1 header, dual Flowmaster 40 Deltaflow exhaust, ISKY 262 cam, Duraspark/MSD ignition system.

I plan on getting a limited slip unit soon (the 3.55 gears are already here-(not installed (-how much should install for gears be in an 8" rearend?)))

But what else should I do?

Thanks.

 

[CobraSix]

T-5 and a Turbo!!!

Slade

 

[addo]

221 shortblock, plus Slade's ideas, plus TCP front end and full underbody strip/detail. It'll stick like glue and pull 12s.

 

[Anonymous]

complete strut tower setup and total control suspension kit !!

got almost al the parts ready ,reproduction of the tc products ! stainles steel , and with urethane bushing ,no molly rod ends !
strut tower setup is ready , gone instal it end of the month to see how it fits ! wil make some pic ofcourse !
suspension is getting along , i,m missing some parts ,the tubing and plate,s are ready [ laser cut ] and the tig welding also , i cant make my mind up for to use with the coilover shocks , i think i buy some new one,s . got now used one,s from a jaguar ! with the urethane setup and the jaguar shocks this would be a great and cheap setup !!!
i think when ready , this set wil go for about 850$ complete stainles steel / tig welded , any powdercoating color you want it , and with the jag shocks, and al the hard ware and urethane bushing
so a complete bolt on kit ,!

 

[MustangSix]

Think about going to a 500 cfm carb. Then work on handling, which is a light car's forte.

 

[Anonymous]

Put her on the Dyno!!! You already have the gears then that would be the next thing on my list. It will make a huge difference! After gears you need a turbo or supercharger.

 

[Anonymous]

Disk front brakes. Thats what I am doing next...

Bill

Never go faster than you can stop....

 

[Anonymous]

I like the TCP mods... those are on my list someday.... maybe.

But I would consider adding in Subframe Connectors and Traction Bars.

Work on Handling, that will only make things better...

IMHO

 

[BIGREDRASA]

Brakes, power boosted. Stop! 8) Export brace and 1" sway bar, in that order. 8)