non loado distributor for 65 does it exist

[rommaster2]

Ok i'm bringing this question up because the duraspark is just a bit too high on the difficulty scale for me to accomplish right now in terms of wiring everything up. I was looking at kragens website and they list these two different ones for a 65.

http://www.partsamerica.com/ProductDeta ... 18&PTSet=A

Now this one has springs showing which i believed was the difference between the two however it has the vacuum advance like mine where its a screw in.

http://www.partsamerica.com/ProductDeta ... 18&PTSet=A

Now this one does not have springs showing, however it looks different then mine on the outside for instance having a different vacuum advance module.

http://www.partsamerica.com/ProductList ... istributor

Or perhaps its one of these two which are for a 68 mustang. Neither show any springs like the obvious ones in the first one mentioned.

now i know the duraspark two is a good upgrade, pricing it out i'd end up about the same for this and the pertronix ignitor for it but this requires no rewiring for me. I already have a hotter coil. Basically if i do this upgrade then i can rebuild my sisters 2 barrel off her mustang and mount it with an adaptor.