non vacume fuel pump

[twbowhunter]

new here and i was wondering if someone could help me with this i am building a 68 bronco with a 170 motor im trying to get away from the fuel pump with the vacume lines but i cant get any of the parts houses to find anything that has the same bend in the accuating arm is this impossable or am i not getting it, i even called cliffords and he couldnt help thanks in advance

 

['61 Draggin Wagon]

Check a single action fuel pump for a '67 Bronco. Or a '67 Falcon.

 

[twbowhunter]

tried that, still the arm is to straight my vacume one has more of a bend and the part that rubs is on the top any more sugestions? i know one of you have the answer

 

['61 Draggin Wagon]

Jeez, I guess that I put one for a '61 Falcon with electric wipers on my '61 Falcon. That was when I put electric wipers on it.
The '78 block that I built, I put a fuelpump for a '78 on it. Works fine.
I didn't realize there was that much difference.....
The '67 Bronco that we work on at our shop(170, 3 speed), that has a '46 Ford sedan delivery body on it, has had a fuel pump replaced once by us. We used a '67 Bronco pump. Have you actually tried the pump on the block? Or just studied it? Some of them mount upside down too.....
It'll be interesting to see what you finally end up with. Keep us informed.

 

[wallaka]

It doesn't matter if the arm hits the cam lobe high or low, it still pumps.