stock 200 rods and main sizes

[Timnmelinda]

Helpme out what are stock sizes, waqnt to get new bearings do not know if crank has been turned

 

[wallaka]

If it has been turned, the bearing shells will have the undersize stamped into their reverse sides, e.g.: .010, .020, etc.

If there isn't anything on there, they are probably standard. I'll look up the specs in the manual when I get home, though.

 

[350kmileford]

I would appreciate these numbers as well.

 

[fordconvert]

Seems like something that should be a sticky?

 

[Timnmelinda]

Out of all the people that have read this,
NONE OF YOU KNOW THE DIMENSIONS?

I am not the only one wanting this information, I could not believe even Mike on his site under 200 specs did not have these dimensions.
I know someone can Help with this! As many of you that have rebuilt 200 engines, I know you checked these numbers?[/b]

 

[falcon60]

And the "secret" specs are.........

Mains: 2.2482-2.2490
Rods 2.1232-2.1240

Terry

 

[Timnmelinda]

I knew somebody could share without too much difficulty,
Seriously I have looked all over the internet, found just about every other dimension possible for these but those specs just were not showing....

Thank You !!!

 

[fordconvert]

Out of all the people that have read this,
NONE OF YOU KNOW THE DIMENSIONS?

I am not the only one wanting this information, I could not believe even Mike on his site under 200 specs did not have these dimensions.
I know someone can Help with this! As many of you that have rebuilt 200 engines, I know you checked these numbers?[/b]

Exactally why I suggested a sticky. I have that info in my shop manual at home but was on the road last week. I even have a bookmark on that page because I have had to refer to it so often either for my own use or to post it here.

 

[wallaka]

Oops, forgot until this morning. Anyhow, the factory shop manual was the best investment I've made so far. 40 bucks, and has EVERYTHING.

 

[Timnmelinda]

I fully agree about the shop manual, I have one BUT I recently moved my business warehouse from one location to a bigger and nicer location.
The warehouse does duty as my garage to work on the cars, and the manual is buried somewhere yet to be detirmened from the moving process!