Throttle Linkage - Aussie Head

[Anonymous]

Does anyone have a picture of their throttle linkage with an Aussie head and a 5200 Holley?

 

[CobraSix]

I used a V-8 throttle rod like this:

http://www.kastang.net/pictures/65musta ... v8rod2.jpg

I then hooked it up to a throttle cable. You can also use the standard V-8 linkage too I think

Slade

 

[AzCoupe]

I dug thru my picks and this was the best I could find. It was really simple. I just took a 6" piece of electrical conduit and made an extension to slip over the existing rod that comes up behind the block (attached to firewall) as it was to short to clear the manifold. Bolted it on, and then took the old linkage, reversed it, and bent the ends to suit. Took me all of fifteen minutes. Hope that helps.

 

[Anonymous]

AZCoupe, CobraSix - thanks guys.