VI Head Push Rod Clearance

65coupei6

Famous Member
Staff member
VIP
There were a couple of questions about push rod clearance with the aluminum head. So, I thought I would post a picture.
This is the best picture I could take. No modifications were done. This is also with 3/8" push rods which are thicker then the norm.

IMG_20210906_142719.jpg
 

fast64ranchero

Well-known member
I machined mine for more clearance with the 3/8" push rods and Terra yellow rockers. Yours look very close, keep and eye on them to see if you see any signs of rubbing
 
Top