Where to get flywheel

[66Sprint6]

Ok, ive tracked down every part except the freakin flywheel. Ive heard that the turbo 2.3 stang and turbo coupes have the 9inch flywheel, but will it work on my car??? Will it bolt in perfect, etc? I want to make sure before I try to buy anything. I still havnt found anywhere to get one, so if anyone has any places, lemme know!!!!
Matt

 

[66Sprint6]

oook, I found a place, BUT, will the 2.3turbo flywheel work for me??? Someone HAS to know, lol!
Matt

 

[CobraSix]

What bellhousing do you have? Do you have the smaller early style? If so, no, the 9" will not work, you'l need the 8.5" recessed that came stock on these cars. But, since your's is a 66, I'm assuming you have the larger later style. If so, why mess with a 9" flywheel, I think those will fit the larger flywheel? Do you know have a flywheel already? if you do, why are you changing it. You should be able to use your existing flywheel. The only thing that needs to match the tranny is the clutch disc. If you use the larger flywheel, then get a V-8 T5 clutch disc, it will fit the 4cyl T5.

Slade

 

[66Sprint6]

See, I am converting from a C4, so no flywheel. I have a V8 T5. What size flywheel do you recomend, will any SBF flywheel work, that would be awesome!!! I am getting the 66 3speed bell. I ask all these questions because I have no idea when it comes to the T5. Like I said, I have a 66 bell, and a V8 World Class T5. Whats the best set up??? LEt me know guys before I start buying parts.
Matt

 

[Guest]

You need the 9" flywheel for the 200. Check Napa, I believe that they sell 9" flywheels new. Otherwise, go eBay hunting or make some calls to Mustangs parts houses (used). You can find them.

A while back I even posted a Bronco website that sold those flywheels. Don't know where it is now though.

Al

 

[66Sprint6]

Alrighty, I can do that! lol. NOW, since Im gonna get the 9" Flywheel, I imagine Im stuck looking for a 9" Clutch right? Once I get the flywheel all Ill need is a pressure plate, a clutch disk and throwout bearing right?? Is there anything Imissing as far as internals go? Thanks for your help guys, I really appreciate it!
Matt
By the way, does anyone know if the 2.3 liter turbo flywheel will bolt into out 200???? I know its a 9" but Im not sure it will bolt in. That would be kool, found some aluminum and lightened steel ones online.