65-coupe
Well-known member
Well I finally am starting my 250 short block build. Meet with the machine shop yesterday and set a plan. I have a set of NOS TRW forged pistons with a 6.5cc dish. I will be installing ARP rod bolts and main bolts. Everything will be resized with the new ARP bolts installed. He will be balancing everything so it runs nice and smooth. End C/R with be 10.5-1.
I will be installing my CI alum head(50.5 chamber) and intake, 1.65 YT roller rockers, DUI dist recurved for new build, new high flow water pump from FlowKooler, headers, electric fans, new oil pump and fuel pump. Holley 390 4bbl. I plan to install a 2bbl FiTech shortly after drive the engine for a bit.
Still not sure which cam I will be running.
I will be installing my CI alum head(50.5 chamber) and intake, 1.65 YT roller rockers, DUI dist recurved for new build, new high flow water pump from FlowKooler, headers, electric fans, new oil pump and fuel pump. Holley 390 4bbl. I plan to install a 2bbl FiTech shortly after drive the engine for a bit.
Still not sure which cam I will be running.