Does anyone know if there are intakes for 3 side mounted Mikuni carbs for the CI AL head. I believe they should be the same as the intakes for the Weber DCOEs.
I know this is a different head ("Oz pre x-flow") but take a look at the 1st pic in the 2nd group of pic (after the mag. repro & at the head on the blue towel)
It shows one adaptation of the head for welding on some tubes, then plates - to serve as a base for other co.'s intakes (Lynx, Batteman) for larger market carbs (SU & Webers). A 2 step process like this is a hassel but 1 way it was/is being done. The Offie currently in production wrks w/o cutting off the log for triple down drafts
I think 6 Mikunis have been placed directly @ the ports of a sawed off log and there are some flow charts/numbers recorded (40 yrs ago?).
Further down in this thread R pic of other carbs and the 2 intakes (ALL on these OZ heads which R out of production. I think the Lynx & Batteman R out too but the Batteman would not fit in our engine bays).
- -Chad ('from' "'the inline sm 6 performance/tech forum")
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.