rjseibenick
New member
Does anyone know the CFM of the Holley single barrel carb # 1946. Was used on the 80 to 83 200 cu. in. 6 cyl. Also how can I get the venturi size of the carb . Thanks .
james singleton":i8al3nud said:LaGrasta, that carburetor you mentioned that is on Ebay looks just like my 1940 carb, but it appears to be the "non-SCV" model. There is no diaphragm on the Ebay carb, indicating that the carb on Ebay is for a 'non-SCV' carb/distributor set-up. In picture #4 on Ebay, you can see a hollow (or empty chamber) just below where the fuel line connects to the brass fitting; that is where the diaphragm for a "SCV" model carb would have the diaphram. I mention this, because I believe you were looking for the SCV model/type! (?). James
aribert":zqfd16m0 said:If anyone wants a spare Holley 1946, I have one off of a low miles '78 Fairmont.
Car had 50K miles on it when I bought the engine. Carb has the mfg tags on it and looks like it has never been dismantled. Only ran the carb briefly after installing the engine in the car (just to see how the engine was, never hooked up a throttle - my car had a linkage, not a cable). Carb has been siting on a shelf the past two years. Rebuild kit would be recomended.
aribert":3dlx7wx2 said:If anyone wants a spare Holley 1946, I have one off of a low miles '78 Fairmont.
Car had 50K miles on it when I bought the engine. Carb has the mfg tags on it and looks like it has never been dismantled. Only ran the carb briefly after installing the engine in the car (just to see how the engine was, never hooked up a throttle - my car had a linkage, not a cable). Carb has been siting on a shelf the past two years. Rebuild kit would be recomended.
aribert":29ifjk28 said:If anyone wants a spare Holley 1946, I have one off of a low miles '78 Fairmont.
Car had 50K miles on it when I bought the engine. Carb has the mfg tags on it and looks like it has never been dismantled. Only ran the carb briefly after installing the engine in the car (just to see how the engine was, never hooked up a throttle - my car had a linkage, not a cable). Carb has been siting on a shelf the past two years. Rebuild kit would be recomended.