Thanks for the info X, so if i was to look for a distributor for my pre-64 block i want a 81 or later aussie dis? or would a search for Australian duraspark work?
Any competent machine shop should be able to ream out the small shaft bore to comply with the larger 64 1/2 & up blocks size. Then you can use the DS11 & HEI distributors. Note i did not mention the DUI cause it has housing design problems & the over priced DS11 with a full length bushing which also has vertical movement & is just a reman. distributor with a generic curve & has a non adjustable vacuum advance plus a non hardened distributor gear.
Other wise some of their products are very good.
How do i know cause i fix those mentioned above every week. Bill
Thanks for the info X, so if i was to look for a distributor for my pre-64 block i want a 81 or later aussie dis? or would a search for Australian duraspark work?
Yes, the Aussie Bosch made Duraspark or even the TFI, both have a really nice F150 4.9 style spark curve which is perfect with a mild to wild in line six.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.