Hi All,
With the help of this forum and the tech pages I was able to diagnose some issues with my 68 Mustang. This weekend I swaped out the SCV carb for a non-SCV carb! I also installed a phelonic spacer as I was running into some vapor lock issues.
When hooking up the choke tube I noticed the old choke tube was broken off in the exhaust manifold. I removed the exhaust manifold and drilled out the old choke tube.
I plan to tune it with a vacuum gauge now that I have the right parts on the car and I have read through the forums but would like to confirm I am going about this the right way.
>>>>Warm up the car until the choke is fully open. Then tune with vacuum guage following the steps here.
If you guys see anything odd or have some suggestions for me, please let me know. I also, want to thank you all for your help, this forum is a great resource.
With the help of this forum and the tech pages I was able to diagnose some issues with my 68 Mustang. This weekend I swaped out the SCV carb for a non-SCV carb! I also installed a phelonic spacer as I was running into some vapor lock issues.
When hooking up the choke tube I noticed the old choke tube was broken off in the exhaust manifold. I removed the exhaust manifold and drilled out the old choke tube.
I plan to tune it with a vacuum gauge now that I have the right parts on the car and I have read through the forums but would like to confirm I am going about this the right way.
>>>>Warm up the car until the choke is fully open. Then tune with vacuum guage following the steps here.
If you guys see anything odd or have some suggestions for me, please let me know. I also, want to thank you all for your help, this forum is a great resource.