charliecurrie
Well-known member
Econoline":1nj5ae70 said:Can you depress the lifters? Is it possible that when installed the lifters were fully pumped to the top and can't bleed down now?
During the first couple of times I tried to adjust the rockers, as I would tighten them to zero lash and stop, a couple of the lifters would sink enough for the rod to become loose enough to twist. But, only a couple, not all.
I tried depressing them yesterday when the rocker assembly was off and they didn't seem to move at all.
I'll have to pull the head and remove them to really be certain.