Attached are photos of a an EOBE cylinder head that is being sold in my localish area. Guy is selling this head with a number of other items. I have a 79 200 in my car, I’m looking to do the machine work from the manual to my cylinder head this fall. With the extras; cam, carb, HEI distributeor it seems like a viable shortcut.
I have no experience as to what a well machined head should look like. Can the forum experts please take a look and tell me if this at least looks good.
Specifically the 2 barrel carb flange, the valves, retainers, chambers and the valve train.
At least visually it looks to me that the rockers and valves don’t fit properly. The tips don’t line up with the centers of the valves or cups with the pushrod holes.
Any help would be greatly appreciated.
I have no experience as to what a well machined head should look like. Can the forum experts please take a look and tell me if this at least looks good.
Specifically the 2 barrel carb flange, the valves, retainers, chambers and the valve train.
At least visually it looks to me that the rockers and valves don’t fit properly. The tips don’t line up with the centers of the valves or cups with the pushrod holes.
Any help would be greatly appreciated.
Attachments
-
8564B5D1-9332-4237-9A36-1D0D7E0E4D10.jpeg3 MB · Views: 254
-
E4DC5C59-5C58-4B84-B9DF-272F914D8A3A.jpeg2.8 MB · Views: 254
-
673F708A-2A53-4644-866E-DD0BF2679A19.jpeg2.6 MB · Views: 254
-
B4304F1C-528C-472D-B2E1-6EFA6B38738E.jpeg3 MB · Views: 254
-
B06CB952-543C-4401-8037-C67F6B3FFD8A.jpeg2.5 MB · Views: 254