Cylinders 1,2, and 3 are not firing. Just so happens that it is every other wire on the cap.
Plug will spark when removed/grounded to the block.
Rotor, cap, points, etc... all new
Gap/dwell set to factory specs...
Cylinder 4,5,and 6 fire normally....
Still troubleshooting, but thought I would toss it out there for ideas.
Plug will spark when removed/grounded to the block.
Rotor, cap, points, etc... all new
Gap/dwell set to factory specs...
Cylinder 4,5,and 6 fire normally....
Still troubleshooting, but thought I would toss it out there for ideas.