Here is a list of Eagle connecting rods that will work in the Ford 250 six.
They are Chevy LS rods which do not have an offset beam.
The list contains both "I" beams and "H" beams.
Prices for a set of 8 range from $200+ to $400+
Length, Part Number, Weight, Design, Journal Size, Pin size HP rating
6.100 SIR6100MLW ______ 600g I-Beam 2.100" 0.945" 500
6.100 SIR6100NLW _______600g I-Beam 2.100" 0.943" 500
6.125 SIR6125BBLW ______600g I-Beam 2.100" 0.927" 500
6.125 FSI6125O___________605g I-Beam 2.100" 0.927" 700
6.125 FSI6125O2000 _____605g I-Beam 2.100" 0.927" 900
6.200 SIR6200BBLW ______610g I-Beam 2.100" 0.927" 500
6.100 CRS6100L3D _______650g H-Beam 2.100" 0.927" 750
6.100 CRS6100M3D_______650g H-Beam 2.100" 0.945" 750
6.125 CRS6125BLW_______550g H-Beam 2.100" 0.927" 600
6.125 CRS6125O3D ______620g H-Beam 2.100" 0.927" 750
6.125 CRS6125O3D2000 _620g H-Beam 2.100" 0.927" 1300
6.200 CRS6200O3D ______650g H-Beam 2.100" 0.927" 750
6.200 CRS6200O3D2000 _650g H-Beam 2.100" 0.927" 1300
The big ends are .940" wide.
For a discussion on big end width differences see:
viewtopic.php?p=625198#p625198
[image]https://www.dropbox.com/s/eklph8jgb8klmzy/Eagle%20rod.jpg?raw=1[/image]