New engine never cranked. Still working on vehicle rotisserie restoration after 2 years. Engine specs as follows:
'66 200. Au 250-2V head ported w/ oversize valves. Aussiespeed 4v alu intake. DUI. Carb: Autolite 2100 1.21 (300cfm) I will go to a Holley 4v. if warranted. Single outlet header w/ 2.5" exhaust. Installed cam: Clay Smith H-274-0-R cam. HD valve springs. Trans: C4 . Final drive ratio 3.20.
Is the cam too wild for this build? I want a good idle. While overhauling the C4 what torque converter would be appropriate?
'66 200. Au 250-2V head ported w/ oversize valves. Aussiespeed 4v alu intake. DUI. Carb: Autolite 2100 1.21 (300cfm) I will go to a Holley 4v. if warranted. Single outlet header w/ 2.5" exhaust. Installed cam: Clay Smith H-274-0-R cam. HD valve springs. Trans: C4 . Final drive ratio 3.20.
Is the cam too wild for this build? I want a good idle. While overhauling the C4 what torque converter would be appropriate?