Hey guys,, been awhile, starting tinkering again and heres my next issue :roll:
I took the flex plate from my old six and put it on my rebuilt one. I also used the spacer that bolts behind it. Whats happening is just under half throttle there was grinding sound, like the fan hitting something. With that ruled out I found that the ends of the TC bolts had rubbed a little bit and significantly on the edges of the plate at all 4 or 5 points where ya wrench it to the TC.
Do I need another spacer somewhere?
Thanks guys
Lee
I took the flex plate from my old six and put it on my rebuilt one. I also used the spacer that bolts behind it. Whats happening is just under half throttle there was grinding sound, like the fan hitting something. With that ruled out I found that the ends of the TC bolts had rubbed a little bit and significantly on the edges of the plate at all 4 or 5 points where ya wrench it to the TC.
Do I need another spacer somewhere?
Thanks guys
Lee