All Small Six Tri-Power Carburetor Options?

This relates to all small sixes
Status
Not open for further replies.
Besides being gorgeous beyond belief, check out this triple linkage.

232323232%7Ffp%3A%3B5%3Enu%3D3233%3E442%3E6%3A2%3EWSNRCG%3D33%3C8%3B5%3B%3A9433%3Anu0mrj
 
australian xk (1960/61) falcon 170 ci race engine ;log cut off and 6 tuned length intake manifolds added




 
That’s a bute! Really-really neet setup! I’ve been doing some research and found a few kits that should be able to be cobbled together to use for our Offy setup. See links below.

The price might be prohibitive (shipping from Australia) but the concept is spot on. I’d like to find a hex-rod and hex-heim joint setup stateside, then buy all the bits and pieces separately, unless somebody is making a kit.

http://compare.ebay.com/like/4003619581 ... s&var=sbar

http://www.weberperformance.com.au/popu ... 26&image=0

http://recarb.com.au/images/cms/dcom_l28_3_400.jpg

http://recarb.com.au/ford-triple-weber- ... -p-86.html
 
that looks amazing, i didn't go with 3 ict's because i think that it was designed to work with a larger carb in the center since it has a larger bore, i have seen a few people on the forum running 1101's as the center and holley 1904's for secondary's so i thought i would try it with ict's, i chose ict's because the linkage arm is adjustable. i did have to mill the taller carb adapter to match the others thickness then fill the old linkage mounting hole, drill a new hole and tap it, to get it to work properly :nod:
 
jdn21758":1wa8vqco said:
i got 3 carter YF carbs,,




it got a nice flow.
greetzz JD.

So how did you overcome the disparity between the center and outer inlet sizes? (By the way, that engine looks super nice!)

offy1_zps4453e80c.jpg
 
Status
Not open for further replies.
Back
Top