200 carb plate

[broncopilot65]

I have a carb 1101 with a 1.75" opening and would like to use it on a 200 with a 1.5" opening on the log head. I looked at drilling out the plate but there does not seem to be enough material to seal the vac port on carb.
Does anyone make a adaptor plate for this. Thanks

 

[Bradbutlernc]

Tried the same thing, there is no adaptor availible :|

 

[broncopilot65]

Thanks what did you end up doing

 

[Bradbutlernc]

Rebuilding the original 1100 and putting it back on. I suppose it wouldnt be hard to put on though if you tried hard enough, maybe pull the preheater plate and see if it bolts up then?

 

[broncopilot65]

Thanks for the help I think I found a spacer of a newer 200 it does not have the coolant heat but the opening is 1.75" and it looks like it will boult up. I think it will work. I will let you know

 

[Bradbutlernc]

Yea thats interesting that you found something, i couldnt find nothing and i emailed 2-3 companies about an adapter. Id like to try the 1101 on my 200 too but the 1100 works fine for right now, except the choke