250 crankshaft

[63stl_comet]

Will the 250 crankshaft and rods work in the 200 block to get 250 cubes of displacement?

Thanks
Brian

 

[Anonymous]

From what I understand is NO. The cam shaft gets in the way. If a big cam is used there's a small chance that the conecting rods may come in contact with a cam lobe or two. I had asked a question about trying to get an extra 20 to 30 thous of stroke out of a 200 crank and this was brought up. From what I understand the 250 has the same lenght and width as a 200 but has and extra 1.5 inch deck height.

 

[jwb68c]

I think the 250's a little wider at the oil pan rails, and about 2" taller. Is the connection in Iraq very quick?

 

[Anonymous]

Some days it is, depends on the time of the day. Late at night it plucks along quicker then during the day.

 

[jwb68c]

Stay safe man.

 

[ASMART]

What jwb68c said. Also, thanks for your service. With out people like you, we would all be in deep do do.

 

[mattri]

Ditto

 

[xctasy]

Ditto x2. From Noo Zealand...

 

[Anonymous]

Thanks guys. Just two more months and I leave this place. Been here since March. Not quite a year but 10 months is long enough. One good thing is that the wife and I have saved a good amount of money. Thanks again, later.