65 200 six block

[68_sixpeashooter]

Hello,

I have a 65 200 six cylinder engine that I'm installing in my 68 mustang. Its fully rebuilt, and my question is: will the 65 block fit my 68 c4 bellhousing? Or would I need to get a different bellhousing for it to fit? I really hope I don't have to look for another bell that will just delay my build even more.

Thanks,

 

[rbohm]

8) it should bolt right up. the C4 uses a small bell housing bolt pattern, which means the top two holes are lower than the large bell housing pattern.

 

[68_sixpeashooter]

Thanks a lot! It should be straight forward then.