Adapter bracket

[TucsonHooligan]

I need to know where to find the adapter bracket to install a c4 transmission in a 64 Falcon. It was orginally a manual 3 on the tree, but the previous owner swapped it for an auto, and instead of using the proper mounting harware, drilled holes in the floor of the car and put some jerry rigged bar across the bottom of it. I have the tranny out to swap the torque converter, and figure I'll do it up right this time. So.....where do I find one and how much am I looking at price wise?

 

[CoupeBoy]

A factory C4 crossmember for a 1964 Falcon is what you are after? I don't have one but I am wondering if you will luck out and a '64.5-66 Mustang one might fit? Anybody know for sure? You could always just make one that fits properly.

-ron

 

[TucsonHooligan]

No, this is an actual part made for specifically this. Its an aftermarket part that bolts in and uses the original manual mounts, but adapts to fit the auto. I saw it in a catalog once, now I can't find it.

 

[mach1 mark]

National Parts Depot? NPD

Dennis Carpenter?

 

[BUZZ]

Falconparts.com for 75 dollars. Just checked their web site its on the first page. Hope this helps.