Air Filter Assembly

[Kal]

I’d welcome your suggestions to source an air filter assembly for the autolite 1V carburetor for a 1966 Bronco 170 ci. Everything I keep seeing is for a 2 barrel or 4 barrel. I’d prefer something classically styled and to stay away from the oil filter systems. Although the look of those, in my humble opinion, are better than a chrome disc.

 

[DON]

Keep in mind you can modify the bigger opening to fit the smaller carb. A piece of sheet metal welded or even sealed and riveted to the bottom

 

[Kal]

Thank you but access to a welder or actually welding is well beyond my capabilities. I found the adapter plate on vintage inlines that should allow compatibility with most 14 inch air cleaners. Pricey at $75 but will save me a huge headache. Ha!

 

[Kal]

Thank you but access to a welder or actually welding is well beyond my capabilities. I found the adapter plate on vintage inlines that should allow compatibility with most 14 inch air cleaners. Pricey at $75 but will save me a huge headache. Ha!

Autolite 1100 Air Cleaner Base Plate | Vintage Inlines

This billet base plate adaptor allows you to use any stock 2V/4V air cleaner with a 5 1/8" neck, including alloy Air Cleaners and Carb Hats, on your Autolite 1100-1V carburetor or Sniper 1100 fuel injection.

www.vintageinlines.com

 

[powerband]

If you have the original carb on the Bronc', you should be able to put an original from a Mustang or Falcon - E-Bay is a good source to search, clean or new @ $100 - used / blemished @ $ 50 .
.
Falcon used same and typically list for less $$
.
typical

1967 Mustang, Falcon 200 CI Six Cylinder Air Cleaner Assembly OEM FOMOCO | eBay

1967 Mustang 200 ci 6 cylinder air cleaner includes the base and lid. The air cleaner has been glassbeaded, etch primed , and painter in Ford corporate blue. Some pitting on the cover as shown. This air cleaner also fits the 1967 Falcon and possibly others for cars and light duty truck of era...

www.ebay.com

.

.
Typical aftermarket small air cleaner run @ $ 30 ("Mr Gasket" etc)

Amazon.com: 2-5/8 2-5/16 inch Air Cleaner neck Inlet Diameter 2.625” 2.27” compatible SPE-4790 Fits all Rochester, Holley 1 or 2 barrel carburetors.Suitable for carburetors with and without air filter bracket : Automotive

Buy 2-5/8 2-5/16 inch Air Cleaner neck Inlet Diameter 2.625” 2.27” compatible SPE-4790 Fits all Rochester, Holley 1 or 2 barrel carburetors.Suitable for carburetors with and without air filter bracket: Air Filters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

.
have fun

 

[Kal]

Yes, I’m using my original factory installed carburetor, so I’m focused on autolite 1100 fits.