kirkallen143
Famous Member
Well I finally got the alky/H2O injection installed this weekend and let me tell you, it works great.
At WOT no more denotation with 93 octane pump gas and 25* total timing. I tried 28* total timing and had a slight knock, so backed down to 25* total and the bronco has never run better.
I am using the cheap windshield washer fluid, w/ @ 25% methanol advertised. I plan to try the 50/50 mix of distilled water and denatured alcohol after this mixture runs out and see if I can up the timing some more. At WOT the AFR stayed at a constant 11.2:1 with @ 11 psi of boost, and before it would read 12.5:1 AFR with 93 pump gas and 10 psi of boost, and you could hear the denotation. This was running 25* total timing.
This was a DIY job and worth every penny, @ $175.00. Here's where I got the info from.
http://www.turbomirage.com/water.html
Kirk
ps. now all I have to do is find a way to keep the dipstick from blowing out.
At WOT no more denotation with 93 octane pump gas and 25* total timing. I tried 28* total timing and had a slight knock, so backed down to 25* total and the bronco has never run better.
I am using the cheap windshield washer fluid, w/ @ 25% methanol advertised. I plan to try the 50/50 mix of distilled water and denatured alcohol after this mixture runs out and see if I can up the timing some more. At WOT the AFR stayed at a constant 11.2:1 with @ 11 psi of boost, and before it would read 12.5:1 AFR with 93 pump gas and 10 psi of boost, and you could hear the denotation. This was running 25* total timing.
This was a DIY job and worth every penny, @ $175.00. Here's where I got the info from.
http://www.turbomirage.com/water.html
Kirk
ps. now all I have to do is find a way to keep the dipstick from blowing out.