another question on cam spacer on my 200

[flysure1]

I posted a while back about shearing the cam pin on my 200 while trying to fire it, someone posted to check for the cam spacer ---I left it off and can't find it, I have one coming, the chiltons says it goes behind the two bolt thrust plate---I think the other guy said infront of the plate before the dowel pin----which way????"---thanks

 

[fast64ranchero]

It goes between the cam and the pim, so if you have your old sheared pin out of the cam, place the washer on the cam snout then install your pin into the cam, when done the washer should not come off the cam, as the pin will be holding it, make sure to intall the washer the right way it has a beviled on one side, after intalling the cam, thrust plate and cam gear, turn the cam over by hand, it should turn easy and have a little front to back play. Walt