Article in MuscleCar Enthusiast

[AzCoupe]

Don't know if you guys read the article on the new "Arvinode Exhaust Systems" in MuscleCar Enthusiast? It's pretty interesting. NOTE: Classic Inlines was mentioned in a small sidebar that follows the article. We are very fortunate that Joe (the owner of Walden's) agreed to produce these kits for our Mustangs and Falcons, which are only available from Classic Inlines. I also want to thank Doug (Mustang Geezer) for all his help in getting this done. He made two trips, spending a full day both times at Waldren's shop, so they could take measurements and build the first prototype kit.
THANKS DOUG....



We were also mentioned twice in the past few months in Modified Mustangs & Fords, in the Garage Q&A section. Here's the latest one.

 

[Crosley]

kool stuff for sure

 

[Mustang_Geezer]

Don't know if you guys read the article on the new "Arvinode Exhaust Systems" in MuscleCar Enthusiast? It's pretty interesting. NOTE: Classic Inlines was mentioned in a small sidebar that follows the article. We are very fortunate that Joe (the owner of Walden's) agreed to produce these kits for our Mustangs and Falcons, which are only available from Classic Inlines. I also want to thank Doug (Mustang Geezer) for all his help in getting this done. He made two trips, spending a full day both times at Waldren's shop, so they could take measurements and build the first prototype kit.
THANKS DOUG....

NO problem....glad to help!

Joe's got a neato shop and the 3 trips I took to the drag strip to get the base times from my old exhaust system, then the full Arvinode sytem, then the front half with Flowmasters was fun too!

Luckily Joes shop is only 25-28 miles away so I was able to just load the car up on the trailer and go when I was laid off this summer.

The only thing we wasnt able to test was the 2.25" exhaust vs the 2" exhaust which is still setting in my shop at home. Being I started a new job a back in October (and bad weather cancelling the track time) I was unable to finish the track testing by installing the 2" system.

I just have to return it to Joe when I can get a morning off (which he knows about).

Like I said, it was lots of fun!!

Later,

Doug