would it fit on a tripower setup, im thiking it would be a very tight fit with my holley 1904s, does the carter has a similar linkage as the holleys?
carter rbs
- Thread starter 64 200 ranchero
- Start date
Howdy Back:
I don't think an RBS will work for a center carb on a tri-power intake, for several reasons; First is that, while being relatively short it is a long carb, with an offset fuel bowl. And, IIRC the linkage is a side pull. I guess it is possible to turn an RBS sideways, with the bowl away from the engine. What is your goal?
Adios, David
I don't think an RBS will work for a center carb on a tri-power intake, for several reasons; First is that, while being relatively short it is a long carb, with an offset fuel bowl. And, IIRC the linkage is a side pull. I guess it is possible to turn an RBS sideways, with the bowl away from the engine. What is your goal?
Adios, David
64 200 ranchero":2m2nyf31 said:
As CZLN6 mentioned it may not fit. The problem is often getting the linkage to fit. A RBS with comparative higher CFM may be a good choice for the primary/center TriPower setup. The later six' RBS has the odd lower bowl but isn't much bigger than the 1904's. Tell us how it works ...
HAve Fun
<> 
I briefly ran a 2300 series 2Bbl with unused 1100's with outer ports blocked .
