A
Anonymous
Guest
I have a 76 Mav with a 250 and C4. Great car. I am in the middle of trying to build the 250 to 1970 spec. So far I have de-smoged the six and replaced the carb YFA to an RBS. A couple of weeks ago, I changed the timing change chain and gears to the '70 setup. Today, I bought a set of Advance Curve Springs, Mr. Gasket #925D, and replaced the origional set. When I took the Armature off the Sleeve, I never saw a roll pin. My work area was clean and I would have seen something if it was there. This is where I need help, can anyone tell me what the size of the roll pin? I will go buy one tomorrow.
Thanks,
Ken
Thanks,
Ken