Easy carb & header?

[Anonymous]

OK 1st GREAT FORUM!!! You guys sound great! After coimg home from Nashville from the 40th Ann. Mustang show I want to hop-up my 64 1/2 stang. Its got a 200 thats bored.030 has a 1bbl Holley and a Mallory dual point Dizzy. What is the best/easiest way to put a 2bbl carb on? And what is the best long tube header? Also what about a HEI dist.? Thanks in advance Joe

 

[Anonymous]

Welcome!!

Check out my website for some ideas on how to "direct mount" a holley 2 bbl and some other hop up stuff!

http://www.geocities.com/mustang_man_1966/index.html

Later,

Doug

 

[Anonymous]

I've opted for the 32/36 Weber dgev carb , Clifford dual outlet header , Pertronix pointless ignition. Clifford has the carb adapter , with linkage adapter and gaskets . You will also need to go to a fuel pressure regulator . Modify your fuel line to fit .

Good luck

 

[Anonymous]

OK thanks guys, But any more ideals?
Thanks again

 

[Anonymous]

Get the performance hand book here:
http://falconperformance.sundog.net/
Check out what mike has to offer at Ford Six Performance Parts here:
http://www.fordsixparts.com/
Read the tech articles here:
http://fordsix.com/services.htm
and read the 'Stickys" at the top of each forum.

Oh yha, and ask lots of questions
Welcome & Good luck