Gasket Sources?

[BIGREDRASA]

I needed a gasket for a HW5200, Part # R-9351A. Just one simple air horn gasket. They tell me I need to buy a full kit, ranging from $49.99 to $62+. Does anone have source for just gaskets?

I'm thinking of making my own and posting them for sale.

 

[addo]

I make many of my own gaskets. Around here we get that "kit only" response often, so it's a good incentive. Buy some leather punches for any holes.

 

[BIGREDRASA]

I make many of my own gaskets. Around here we get that "kit only" response often, so it's a good incentive. Buy some leather punches for any holes.

I've done them before, and a leather punch would really help. This being Nebraska, there should be one or two leather work supply places around.

 

[JackFish]

ebay link

Is this it? About $4 from Australia though.

 

[BIGREDRASA]

That's it, I can make them, if people would be interested. I know I'll have to make my own, anyway. Too cheap and impatient to wait for stuff from the Land of OZ.

 

[Anlushac11]

$48 should buy alot of gasket material and a sharp knife.

 

[BIGREDRASA]

Basically, I have a charitable project that I always need a few extra bucks for. I could sell a mounting and air cleaner gasket pair for $5 including USA postage.

 

[JOHN G]

Do you have a current part number that I could use? My buddies family owns a LARGE parts supplier here in cleveland and has been able to order many odd things for me. There is also a company here in town that is a antique/hard to find parts locator. I have always been succesful with these two sources.

 

[BIGREDRASA]

That's the problem, I have part numbers for kits, but not the gaskets. In the case of the Holley/Weber carb, my Holley PN is R-9351, and Motorcraft PN is E1ZE RA.

I bought the 2 into 1 carb adapted from CI, and it has individual gaskets for the adapter to intake, and carb to adapter. However, the tough one is the gasket that goes between the carb body and the air horn.

 

[Eric Rose]

Buy some leather punches for any holes.

Or you can punch them with a hammer and used bullet casing. .22 for the little holes, .50 S&W for the big ones

 

[Bort62]

Call here:

Swift Napa Autoparts‎ - more info »
2325 Cerro Gordo St, Mojave, CA - (661) 824-4796

And ask for Greg. He will figure you out.