Header for Econoline Pickup

[61EconoDave]

Will the Long Tube Dual Out Header that Classic Inlines sells fit in the doghouse for the Econoline Pickups without cutting the floor? If it does hit the floor, about how much needs to be removed for it to fit?

Thanks,
David in Huntsville AL

 

[brm]

Hi
I test fit the C.I. header in my 62 and was about 1/2" away from the floor, it did hang a little low due to the length of the down tubes. it will work fine as Mike sells them, econoline's have generous ground clearance. if I had to do over I would buy the bare metal version and shorten the down tubes about 2"-3"

 

[62goldenrodvan]

I put a clifford shorty for a bronco/econoline on my van and it has good ground clearance, but I had to trim the floor and notch the dog house to have enough clearance so It would not hit when the motor was idling.

Kevin.